Metal Stripper STRIP-100    Tin, Tin-Lead Stripper for Leadframe Rework. Does not attack base metals(Cu alloy & Alloy 42)!   Strip -100 is a high speed stripping chemical for removal of Tin. Tin-Leadframe(for reworks) and can be used for both Cu alloy and Alloy 42 base metals    ■ Merits - Minimal sludge up to 100g/l of Tin/Tin-Lead dissolved. - Used for both Copper alloy and Alloy 42 Leadframe without smut. - Used room temperature. - No base metal attack. - High speed stripper with a big capacity of  100-120g/l of Tin/Tin-Lead dissolved. - Cotains no halide.   ■ Equipment - Tank : PVC or Polypropylene. - Heater : Not required commonly, but etching rate can be raised by heating up to 30℃        PRO-2000A ( Tin Stripper )    Excellent performance on TIN/SOLDER stripping for carrier belt / rack. Minimal attack to stainless steel!  Negligible sludge! You will find the superiority in your process!   PRO-2000A is a  high speedy stripper for stripping of Tin or Tin-Lead from carrier belt / rack on the high speed plating machine.    ■ Features and Merits - Easy to clean tank / cell because of negligible sludge. - Long life time of carrier belt / rack owing to minimal   attack of stainless steel. - One component liquid type and easy solution control only by adding. - Used at room temperature, therefore there is no need  for heating or cooling system. - High speed stripper with large amount of desoving  capability of Tin/Solder - Negligible fume and toxicity during operation.   ■ Equipment - Tanks : PVC or Polypropylene. - Heaters : Neither required nor recommended.

80, Jomaru-ro 385beon-gil, Bucheon-si, Gyeonggi-do, Korea　TEL : +82-32-222-0601　FAX : +82-32-222-0602 E-mail : clint5860@chemtechi.com　Copyrightⓒ ChemTech International All Rights Reserved.